VIDEO MANUALS

UNBOXING & ASSEMBLY

Check the label on the box to verify the correct order. Inspect the box for any shipping damage.

INSTALLING STREAMPORT

Remove the bolts for the side panel and seat.

ADJUSTING BIKE SETTINGS

SET YOUR POWER
Push down on the torque/control button and keep it pressed. Attach the magnetic kill switch and wait for the lights to indicate the power setting. Each blink represents one power level. To set the power to one, release the button after the first blink. To set the power to two, release the button after the second blink. For max power, release after the third blink.

SWAPPING BATTERIES (X-FORCE PRO 50)

Unscrew the seat bolt from underneath the panel. Remove the seat and unplug the magnetic safety kill switch.

USING THE SAFETY KILL SWITCH (X-FORCE PRO 50)

To power off your X-Force Pro50 rapidly, pull on the red string underneath the seat panel. This will disengage the magnetic safety kill switch. You will need to remove the seat in order to re-attach it afterward.

USING THE KUBERG VOLT APP

Download the Kuberg Volt App. Open your phone’s WiFi settings and locate your bike. Follow the steps on your app to connect and set up your bike. Some older bikes might need a firmware update in order to communicate with the bike.
For more information about the Kuberg Volt App, check the FAQ page.